
Easy Load II Peristaltic Pump
|

The Easy Load II is ideal for low flow groundwater sampling where the water level is within 8 metres of ground surface and for all surface water sources.
The Easy Load II is designed for vacuum pumping of liquids. The pump operates by mechanically squeezing of tubing (peristalsis), so the sample only contacts the inside of the tubing without cross-contaminating any other parts of the pump. This allows for consistent sample integrity as well as easy cleaning and replacement.
Key Features
• Exceptional field durability
• Easy Load Pump Head allows instant interchange of tubing
• Up to 1 litre/min. delivery rate
• Operates to a depth of up to 8 metres
• Variable speed control
• Dual pump head position (fast or slow rpm options)
• 12V DC with 220V AC Power Socket
• Reversible flow feature for back-flushing
Check out the range of options and accessories below or call +44 121 733 7743 today to speak to our technical sales team.
For more details:
Easy Load Pumps and Kits
|
Choose one of our Easy Load Pump Kit options - from a standalone pump to one of our great value ready to go kits complete with field case (EL2c) and rechargeable
battery module (EL2cb). EL2c Kit - Easy Load II Peristaltic Pump - Field case - Power cord (110V AC) - Battery clamps (12v DC) - Size 15 (4.8mm ID) Silicone Tubing x 1.5m EL2cb Kit as EL2c plus - Modular rechargeable 12V battery - Battery charger All units include a power cable and a 12V conector with alligator clips for use with any 12V battery. |
|
|
|
|
|||||||||
|
|||||||||||
Easy Load Accessories
|
Field cases and rechargeable battery modules can be purchased separately. A field case is included in both the EL2c and EL2cb kits. A rechargeable battery is included with the EL2cb kit. |
|
|
|
|||||||||
|
|||||||||||
Small Diameter 10mm (3/8 inch) Silicone Tubing and Accessories
|
Use our standard 3/8 inch (9.5mm OD x 4.8mm ID) high quality platinum cured silicone tubing for sampling from narrower tubes or for low flow applications. Use a short length of silicone (e.g. 30cm) for use in the peristaltic pump and connect to a drop tube for sampling from the borehole. 6mm OD HDPE tubing is used as a drop tube and is push-fitted inside the silicone tube. This enables water or vapour samples to be drawn from greater depths - as long as the water level in the monitoring borehole remains within suction limit (~8m). Tubing clamps are recommended to tighten the tubing contact point to maintain suction efficiency. |
|
|
|
|||||||||||||||
|
|||||||||||||||||
Small Diameter 12mm Silicone Tubing and Accessories
|
Use our larger sizes 3/8 inch (11.1mm OD x 6.3mm ID) platinum cured silicone tubing for higher flow rates when sampling from narrower tubes. Use a short length of silicone (e.g. 30cm) for use in the peristaltic pump and connect to a drop tube for sampling from the borehole. 10mm OD HDPE tubing is used as a drop tube and is push-fitted inside the silicone tube s - as long as the water level in the monitoring borehole remains within suction limit (~8m). Tubing clamps are recommended to tighten the tubing contact point to maintain suction efficiency. |
|
|
|
|||||||||||||||
|
|||||||||||||||||