WQMP Multiparameter Meter Accessories and Spares
Additional accessories for use with the multiparameter meter, including probes with different cable lengths, replacement probe modules, iTags and spare calibration beakers.
For more details:
WQMP including Accessories
or
Download as PDF
Spare Probes with Cable
To allow the user greater flexibility in the field, probes with varying cable lengths can be purchased separately as accessories. Standard cable lengths of 4, 10 and 20 metres are available off the shelf. Customised lengths are also available up to a maximum of 100 metres.
The probe is pressure rated to allow a maximum depth of submergence below water level of 40 metres.
|
|
|
|
|
|
WQMP/P004
|
Multiparameter Probe with 4m Cable
|
|
|
WQMP/P010
|
Multiparameter Probe with 10m Cable
|
|
|
WQMP/P020
|
Multiparameter Probe with 20m Cable
|
|
|
WQMP/P030
|
Multiparameter Probe with 30m Cable
|
|
|
WQMP/P040
|
Multiparameter Probe with 40m Cable
|
|
|
WQMP/P050
|
Multiparameter Probe with 50m Cable
|
|
|
WQMP/P060
|
Multiparameter Probe with 60m Cable
|
|
|
WQMP/P070
|
Multiparameter Probe with 70m Cable
|
|
|
WQMP/P080
|
Multiparameter Probe with 80m Cable
|
|
|
WQMP/P090
|
Multiparameter Probe with 90m Cable
|
|
|
WQMP/P100
|
Multiparameter Probe with 100m Cable
|
|
|
Probe Sensors
The sensors on the probe are all replaceable independently and are easy to maintain and keep clean. Sensor replacement is quick and easy with screw type connectors and colour coding.
The pH/ORP module can be replaced with the same or by a single parameter pH module.
The galvanic DO sensor has a built-in thermistor to provide fast temperature corrected readings. The galvanic sensor does not require polarization time so it is ready for measurement at a moment’s notice.
The 4-ring conductivity system ensures stable conductivity readings that are immune
to surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.
The meter automatically recognises the presence of either the pH or pH/ORP sensor. Both sensors have a cloth junction which allows greater sensitivity, and are gel filled for improved resistance to contamination. The meter also displays pH mV readings ideal for trouble shooting.
|
|
|
|
|
|
WQMP/MPH
|
Multiparameter Probe - pH Sensor
|
|
|
WQMP/MPH&ORP
|
Multiparameter Probe - pH/ORP Sensor
|
|
|
WQMP/MDO
|
Multiparameter Probe - DO Sensor
|
|
|
WQMP/MEC
|
Multiparameter Probe - EC Sensor
|
|
|
Probe Calibration Beakers and Flow Cells
An optional flow-through cell can be separately supplied for the WQMP Multiparameter probe - essential to eliminate air contact with pumped samples from groundwater boreholes and to obtain representative DO and Redox measurements.
Spare calibration beakers are also available. Both devices simply screw-fit in place over the end of the probe modules.
|
|
|
|
|
|
WQMP/FTC
|
Multiparameter Flow Through Cell
|
|
|
WQMP/BEAKER
|
Multiparameter Probe Calibration Beaker (Spare)
|
|
|
iTags
For monitoring and recording data, the WQMP multiparameter meter is equipped with exclusive Tag Identification System: iButton©s with unique ID numbers can be installed at various sampling sites and are used to record specific location information when logging.
|
|
|
|
|
|
WQMP/ITAG
|
Multiparameter iTag Button with Holder (Pack 5)
|
|
|