Waterra Inertial Pumps: Micro Flow System and Accessories
This pumping system is highly recommended for purging and sampling from 13 to 16mm ID piezometer tubes. It can be operated manually to approximately 30m achieving flow rates of up to 0.5 l/min.
Normal Operating Parameters
| Borehole Diameters |
13 to 16mm |
| Depth of Operation |
Manual: up to 30m
Powered*: 40 to 60m
|
| Pumping Rate |
Up to 0.5 l/min |
* using PowerPack PP1
For further technical information and applications see:
-
Applications Sheet (6 sampling systems, 3 pumping methods)
-
Set up and User Guide (field manual, hints & tips)
-
Technical Data (physical dimensions & pumping performance)
For more details:
Manual Inertial Pumps
or
Download as PDF
Micro Flow Stainless Steel Low Profile Foot Valves and Accessories - Internal Fit
The VS stainless steel low profile, round-headed, internal-fitting inertial pump valves provide minimum hydraulic resistence and maximum pumping efficiency. Designed with cutting screw threads, they are simply and quickly attached to tubing using a standard Hex key (supplied separately).
|
|
|
|
|
|
VS2-MF
|
Low Profile Stainless Foot Valve for 6mm ID MF tubing (10mm OD)
|
|
|
VS12-Key
|
Hex Key (4mm) for attaching VS1 and VS2 valves
|
|
|
Micro Flow HDPE Tubing and Accessories
Micro Flow HDPE tubing for downhole use. Available in two coil sizes which can then be cut to length. Ideal for sampling from 12 to 18 mm diameter piezometer pipes. Use with internal fitting VS2 foot valves.
|
|
|
|
|
|
MF-30
|
MF HDPE tubing (10mm OD x 6mm ID) x 30m coil
|
|
|
MF-60
|
MF HDPE tubing (10mm OD x 6mm ID) x 60m coil
|
|
|
Tubing Cutter with Teflon Blade
The Waterra tube cutter (WTC-1) is faster and safer to use than a hacksaw or utility knife and provides straight, clean cuts to tubing with no burring.
|
|
|
|
|
|
WTC-1
|
Waterra tubing cutter
|
|
|