An inexpensive and disposable option for bailing. This 3.5mm diameter braided polyester cord provides an ideal combination of strength and ease of use for most sampling applications.
Code
Description
BC/K35-50
Lifting Cord - 3.5mm diam polyester cord (50m)
BC/K35-300
Lifting Cord - 3.5mm diam polyester cord (300m)
Kevlar Cord
Non stretch, durable and chemically resistant 2mm diameter cord. A quality alternative for polyester cord and a simperk alternative to to stainless steel wirefor sampling or suspending equipment in boreholes.
Code
Description
KC2-100
Kevlar Rope (100m x 2mm - spooled)
KC2-1000
Kevlar Rope (1000m x 2mm - spooled)
Stainless Steel Cable
This 2mm diameter SS cable is ideal for lifting or suspending equipment in boreholes. Can be secured with either flat or cyclindrical rope grips.
Code
Description
S3001/SC1002
Stainless Steel Support Cable (100m x 2.0mm - spooled)
S3001/RG1002
Stainless Steel Flat Rope Grip (For SC1002 cable)
S3001/RG1003P
Stainless Steel Cylindrical Rope Grip Pack inc Key for 1.5 to 2mm cable (Cylinder)
S3001/RGKey
Stainless Steel Rope Grip Hex Key (2mm) for RG1003 (spare)
Manual Reels with Removeable Spools
A simple high impact hand reel avoids unsightly and dangerous trailing of cord on the ground during use. The reel can hold up to 100m of 3.5mm polyester cord, which is supplied separately in 50m or 300m lengths.
The spool is removable, and additional spools can be purchased.
Code
Description
ERL-110
Hand Reel with removable spool (holds 100m of 3.5mm cord)
ERL-111
Extra Spool for Hand Reel
Tag Line (Graduated SS Cable on a Reel)
The Solinst 103 "Tag Line" is a 1.6mm diameter stranded stainless steel cable marked at one metre intervals contained on a reel. The end of the cable is equiped with a clip which can be attached to a variety of devices for temporarily suspending in boreholes including Bailers and Passive Samplers. The supplied tape guide helps protect the cable from damage caused by rubbing against the edge of borehole casing during use.
Using a tag line is quick and easy and because the tape is already marked at 1 metre intervals, cuts out the need to measure the length of cord before it is used.
Each Tag Line is supplied with a 0.7kg weight for use as a plumb line. The weight has tapered ends to minimise snagging in the borehole and can be clipped on and off the cable. The cable itself has a minimal breaking strength of 122 kg.
Code
Description
S103/030
Tag Line - 30m with 0.7kg weight (marked every 10cm)
S103/060
Tag Line - 60m with 0.7kg weight (Marked every 10cm)
S103/100
Tag Line - 100m with 0.7kg weight (Marked every 10cm)
S103/250
Tag Line - 250m with 0.7kg weight (Marked every 10cm)
S103/300
Tag Line - 300m with 0.7kg weight (Marked every 10cm)