WQMP Flow Cell Kit
The Multiparameter Flow Through Cell Kit includes tubing and adaptors to facilitate attachment to pumps with discharge hose sizes from 9 to 16mm OD. This is sufficient to connect to most comonly used air, inertial, peristaltic or 12V submersible pumps.
Silicon tubing (20 cm lengths) is supplied to provide maximum flexibility with sufficient couplings and tubing clamps to prevent oxygen ingress via joints during pumping. A Stainless Steel one way valve is provided to avoid oxygen entrapment when using pulse pumps (e.g. bladder and other air-driven systems).
Additional tubing and 3-way valves are optionally available for situations where longer lengths of tube are needed (e.g. with inertial pumps) and to allow sampling or reduction of flow prior to the flow cell.
For more details:
Download as PDF
Flow Cell Kit and Accessories
|
|
|
|
WQMP/FTCKit
|
Multiparameter Flow Through Cell Kit
|
|
|
WQMP/FTCKitM
|
Multiparameter FTC Kit Manual
|
|
|
SLF-3WV
|
3-way PE valve (for 7-9mm ID tubing)
|
|
|
SLF-3WV/911
|
3-way PE valve (for 9-11mm ID tubing)
|
|
|
S410/SC10F
|
Silicone Tubing - 3/8" x 3/16" (9.5 x 4.8mm). Peroxide cured (per m) (OBSOLETE)
|
|
|
S410/SC10M
|
Tubing Silicone 3/8 x 3/16 (9.5 x 4.8mm). Platinum cured per m
|
|
|
S410/SC10M5
|
Tubing Silicone 3/8 x 3/16 (9.5 x 4.8mm). Platinum cured per 5m
|
|
|
S410/SC16M
|
Tubing Silicone 5/8 x 3/8 (15.9 x 9.5mm). Platinum cured per m
|
|
|
S410/SC16M5
|
Tubing Silicone 5/8 x 3/8 (15.9 x 9.5mm). Platinum cured per 5m
|
|
|
In-Situ RDO Sensors
Filters & Flow Cells
