MiniRAE PIDs
UltraRAE 3000 Portable Benzene PID Detector
|
Key features
- High sensitivity to benzene (down to 50 ppb)
- Reliable benzene readings / Lower risk of false alarms
- 60-second snapshot or 15-minute STEL measurement
- Humidity & Temperature compensation
- Datalogging (1 second intervals)
- ATEX Certified across the range
- Easy to maintain and operate
Proven PID technology
The patented sensor provides many unique features including a 3-second response in VOC mode or 60-second benzene response time, a PID range up to 10,000 ppm (in VOC mode) or 200 ppm in benzene specific mode with improved linearity, AND humidity and temperature compensation.
RAE-Sep Tubes
Inexpensive and accurate analyisis of benzene using low cost RAE-Sep tubes
Designed for Service
These units are built with easy access to the PID lamp and sensor in seconds without the need for any tools! And Waterra can provide an annual or more frequent maintenance and calibration service at very competitive prices.
Rugged Design with the Field User in Mind
These units are built to last and to help you out on site! They include a big graphic display, a field-interchangeable battery pack which is replaceable in seconds without tools, an integrated flashlight for better visibility in low light, a rugged IP67 rated housing which can withstand use in harsh environments and a strong, protective removable rubber boot.
Datalogging
Up to 6 months of data at 1 minute intervals.
Additional Advantages
Units are loaded with features to help the field user including:
- Wireless option enabling real-time transmision of data and alarms
- Automatic lamp type recognition
- Duty-cycling™ lamp and sensor auto-cleaning technology
- Tough, flexible inlet Flex-I-Probe™
- Large keys, operable with 3 layers of gloves
- Strong, built-in sample pump can draw from up to 30m horizontally or vertically
- Loud, 95 dB audible alarm
- Bright red flashing visible alarm
- Interchangeable battery packs (rechargeable Lithium-ion or standard alkaline)
Choosing the Right PID for the Job
For a broader range, high specification PID See the MiniRAE 3000 or for simple site measurements choose the MiniRAE LITE. See MiniRAE PID Sheet for a comparison of features across the MiniRAE range.
For more details:
Download as PDF
UltraRae 3000 Benzene Portable PID with 9.8eV Lamp
|
The UltraRAE 3000 benzene specific monitor is supplied with a 9.8 eV UV lamp, is ATEX certified and comes complete with a range of basic accessories including: operation and maintenance manual, soft leather carrying case, rubber boot (red), Flex-I-Probe and short probe, external filter (x2), tool kit, lamp cleaning kit and alkaline battery adaptor. Also included are 10 disposable RAE-Sep™ tubes required for benzene isolation and detection. Rechargeable Li-ion battery packs (ATEX certified) are optionally available. Rechargeable battery packs are supplied complete with a travel charger and a universal AC/DC adaptor / international plug kit with separate serial PC download cable. |
|
|
|
||||||
|
||||||||
UltraRae 3000 Portable PID with Accessory Kit
|
The UltraRAE 3000 benzene specific monitor can be supplied in a rugged field case as part of an enhanced accessory kit which adds the following items to those listed above: Hard transport field case with customised foam insert, 5 porous metal filters and o-rings, organic vapour zeroing kit and gas outlet port adaptor and tubing. Choose optional rechargeable Li-ion battery packs. If bought at the same time as an accessory kit these are supplied with a robust desk top charging cradle in place of the standard travel charger. |
|
|
|
|
|
||||||
|
||||||||
MiniRae PID Waist Belt & Holster
|
Leg Harness / Holster for MinRae Monitors. Ideal for carrying monitor hands free with other equipment. A belt is required, or can be purchased separately. |
|
|
|
|
|
||||||
|
||||||||
MiniRae PID Travel Charger
|
A lightweight mains travel charger is supplied as standard with all rechargeable battery packs. This unit also includes a serial port connector - used as a means of applying firmware upgrades or for downloading date (from MiniRae 3000 and higher models only). The separate 12V car adaptor cable, which is not supplied with battery pack options, is required for plugging the charger into a 12V outlet in a vehicle. |
|
|
|
|
|
||||||
|
||||||||
MiniRae PID Charger Cradle
|
A robust mains charging desk cradle for use with rechargeable battery pack options. Can charge an instrument and spare battery pack at the same time. Also includes USB connection for downloading data from MiniRae 3000 units and higher. Included as standard within the MiniRAE 3000 and UltraRAE 3000 accessory kits. Purchase separately for use with MiniRAE Lite. |
|
|
|
|
|
|||
|
|||||
MiniRae Calibration Gases and Regulators (Steel Cylinders)
|
For calibration of Mini RAE Lite and 3000 PIDs either 100 ppm or 10 ppm Isobutylene gas in air is commonly used. For calibration of the UltraRAE 3000 benzene specific PID, use 5ppm benzene in air. All gases supplied by RAE are contained in 34L steel cylinders. A special hazardous goods charge applies for supply of these items - please ask. For use with 34L steel gas cylinders, RAE supply either a constant flow regulator (CGA600 female thread, 0.5 l/min - Waterra part no: MR/R001) or a higher spec demand flow regulator (CGA600 female thread - Waterra part no: MR/R002), which has an instrument controlled variable flow gas discharge rate. |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||||
Other Calibration Gases and Regulators (Aluminium Cylinders)
|
Gases can be sourced from any good scientific gas supplier such as STG (www.stgas.eu) who can supply disposable aluminium gas cylinders in variable sizes. Please note: If using disposable aluminium cylinders, or for gas bottle sizes greater than 34L in aluminium or steel, a flow regulator with male thread is required (C-10 male thread, 1 l/min - Waterra part nos: MR/R004 or MR/R005). |
|
|
|
|
||||||
|
||||||||
MiniRae PID External Filters
|
Supplied in packs of 5 or 10, these disposable external disc filters (0.45 µm,45mm dia) are an absolute essential when using PIDs to prevent contamination by dust, dirt or moisture (including rain). Filters push fit onto the end of the Flex-I Probe using the (supplied) metal connector. |
|
|
|
|
|
||||||
|
||||||||
MiniRae PID Filter Tubes
|
Disposable filter tubes for better sampling results. For working in high humidity environments, such as landfill sites, use humidity tubes to remove high concentrations of moisture. VOC Zeroing tubes provide a simple means of calibrating the MiniRae instrument to zero by removing background concentrations of VOC in air (e.g in petro-chemical atmospheres). This will provide more accurate and reliable VOC detection from targeted monitoring points or zones. Humidity and VOC tubes are supplied in packs of 10 and require a tube adaptor (Waterra Part no MR/F003) to connect to the tip of the Flex-I-Probe. For benzene measurement use RAE-Sep benzene tubes for high accuracy measurements with the UltraRAE 3000. Supplied in packs of 5. |
|
|
|
|
|
|||||||||
|
|||||||||||
MiniRae PID Spares and Tools
|
Lamps do become coated over time and regular cleaning with a lamp cleaning kit is essential to retain accuracy. MiniRAE monitors are supplied with a lamp cleaning kit on purchase . Many other spares and accessories are available for all MiniRae products, including the MiniRAE 2000 series. Call us for more information. |
|
|
|
|
|
||||||||||||||||||
|
||||||||||||||||||||