contact

  Product Search


Keyword Search



Quick Links


  Suspension Cable


Suspension cable and accessories for use with non-vented (absolute) loggers.

Choose between stainless steel for long term borehole or other fixed deployments and the convenience of kevlar cord for short term applications.



Kevlar Cord
Non stretch, durable and chemically resistant 2mm diameter cord. A quality alternative for polyester cord and a simple alternative to stainless steel wire for sampling or suspending equipment in boreholes.
Kevlar Cor
Code Description
KC2-100 Kevlar Rope (100m x 2mm - spooled)  


Stainless Steel Suspension Cable
Stainless steel (316 grade) suspension cables are available on 100m spools. We supply 2mm diameter stranded cable which is suitable for most logging applications.

Two styles of rope grip are available for securing the cable ends. Both are simple to use. The flat style rope grip requirse a small spanner or adjustable wrench to secure the cable to a flat plate with two screw nuts. The cylindrical style rope grip feeds two strands of cable through a small stainless steel cylinder and secures these with a single grub screw using a hex key.
Stainless Steel Cable
Code Description
S3001/ACC05 SC100 Cable Reel for SS Cable (SPECIAL ORDER)  
S3001/SC1002 Stainless Steel Support Cable (100m x 2.0mm - spooled)  
S3001/RG1002 Stainless Steel Flat Rope Grip (For SC1002 cable)  
S3001/RG1003P Stainless Steel Cylindrical Rope Grip Pack inc Key for 1.5 to 2mm cable (Cylinder)  
S3001/RGKey Stainless Steel Rope Grip Hex Key (2mm) for RG1003 (spare)  


Manual Reels with Removeable Spools
A simple high impact hand reel which is useful for tidily retrieving loggers suspended on long lengths of stainless steel cable. Spools are removeable which allows several different lengths of stainless steel cable to be retained seperately and then deployed using a single reel body. Each spool can easily hold 100m of Stainless Steel Cable.
Reel
Code Description
ERL-110 Hand Reel with removable spool (holds 100m of 3.5mm cord)  
ERL-111 Extra Spool for Hand Reel  


Torquer Well Plugs
Torquer well caps are a simple well plug incorporating two eyelets for securing loggers suspended on stainless steel cable.

For use with loggers, plugs can be supplied with a 2mm diameter vent hole to prevent pressurisation of the borehole during logging. Please be aware this does introduce a small opening in the plugs and consequently vented plugs should not be used for permanent sealing of boreholes, particularly where flooding can occur.

Choose a Torquer well plug to match your borehole ID (minimum borehole lining ID in mm is indicated in description). Torquer well plugs are capable of expanding in excess of 10 mm above their minimum diameter to provide a water tight seal. Padlocks are not supplied.

For more information on the full range see Torquer Well Plug Page.
Torquer in BH

Code Description
TQ-200 Torquer Locking Well Plug (2 inch - ID: 49 to 60 mm)  
TQ-200V Torquer Locking Well Plug (Vented) (2 inch - ID: 49 to 60 mm)  
TQ-400 Torquer Locking Well Plug (4 inch - ID: 95 to 113 mm)  
TQ-400V Torquer Locking Well Plug (Vented) (4 inch - ID: 95 to 113 mm)  
TQ-PAD Torquer "keyed alike" all weather padlock (6 pack)  


EnviroCaps
As an alternative to Torquer Well Plugs, EnviroCaps are ideal for securing loggers suspended on stainless steel cable within 2 inch (~48mm) diameter monitoring boreholes.

For use with loggers, Envirocaps can be supplied with a 2mm diameter vent hole to prevent pressurisation of the borehole during logging. Please be aware this does introduce a small opening in the caps and consequently vented caps should not be used for permanent sealing of boreholes, particularly where flooding can occur.

EnviroCap locking well caps are attached to the top of well lining, are water tight and include a ring for suspending cable. They feature an exclusive built-in magnetic locking system that is completely sealed from the outside environment eliminating the need for padlocks.

EnviroCap's unique magnetic locking keys are universal - one key fits all caps.
Envirocap

Code Description
S3001/SWH2 Envirocap Locking Well Cap - 48mm ID / 60mm OD (2 inch)  
S3001/SWH2V Envirocap Locking Well Cap (Vented) - 48mm ID / 60mm OD (2 inch)  
S3001/WHKey Envirocap Locking Well Cap Key (Universal)  

© Copyright Waterra 2012 | sitemap | company legal