Coaxial Water Level Dip Meters with mm markings
The Solinst Model 102 Water Level Meter uses a coaxial cable with laser etched markings every millimetre. The cable reels smoothly, remains flexible, and hangs straight in the well. It comes in lengths from 25 m to 300 m.
-
Accurate, Precise Laser Markings
- Narrow 6 mm or 10mm Probes
- Rugged, Corrosion Proof Components
- Strong Flexible Cable is Easily Spliced
A tinned copper-braided shield gives flexibility and a stranded stainless steel central conductor gives strength. It is easy to repair and splice. The cable jacket is of heavy-duty polyethylene for durability.
Whilst designed to measure groundwater levels in narrow diameter tubes and piezometers, the coaxial cable dip meter is equally at home for use in larger diameter wells or where a flexible cable is needed to snake past an in-well pump.
The Model 102 Water Level Meter uses a choice of two small diameter probe designs, fitted on a sturdy ergonomically designed reel. A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole. A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.
For more details:
Download as PDF
Coaxial Dip Meters mm marked - P1 Probes
The P1 probe is made from stainless steel. It is 6.4mm in diameter and 38 mm long. 12 stainless steel weights are beaded above the probe weighing a total of 70 g. These are ideal for accessing narrow diameters tubes, including multilevels.
|
|
|
|
|
|
S102L/030/P1
|
Coaxial 30m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
S102L/060/P1
|
Coaxial 60m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
S102L/100/P1
|
Coaxial 100m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
S102L/150/P1
|
Coaxial 150m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
S102L/250/P1
|
Coaxial 250m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
S102L/300/P1
|
Coaxial 300m water level dip meter (mm markings) with P1 (SS, 6.4mm)
|
|
|
Coaxial Dip Meters mm marked - P2 Probes
The P2 probe is made from brass. It is 10mm in diameter and 38 mm long. 10 brass weights are beaded above the probe weighing a total of 130 g making these more suitable for use at greater depths.
|
|
|
|
|
|
S102L/030/P2
|
Coaxial 30m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
S102L/060/P2
|
Coaxial 60m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
S102L/100/P2
|
Coaxial 100m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
S102L/150/P2
|
Coaxial 150m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
S102L/250/P2
|
Coaxial 250m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
S102L/300/P2
|
Coaxial 300m water level dip meter (mm markings) with P2 (Brass, 10mm)
|
|
|
Mini Coaxial Water Level Dip Meters
The Solinst Model 102 Water Level Meter uses a coaxial cable with laser etched markings every millimetre. The 25m cable is available on an easily transported Mini Reel. Weighted probes are available in diameters of 6.4mm (P1 - stainless steel) or 10mm (P2 - brass).
|
|
|
|
|
|
S102L/025/P1/mini
|
Coaxial Mini 25m water level dip meter (mm marked) P1 (6.4mm) Probe
|
|
|
S102L/025/P2/mini
|
Coaxial Mini 25m water level dip meter (mm marked) P2 (10mm) Probe
|
|
|
S122M/bag
|
Carry bag for Mini dip meters
|
|
|