The WQMP multiparameter meter monitors up to 13 different water quality parameters (8 measured, 5 calculated). The meter has a 128 x 64 pixel dot matrix backlit LCD that automatically sizes the digits and allows full configuration of each parameter measured, units and language selection, and on-screen graphing. Each parameter is fully supported by the on-screen context sensitive help both in the calibration mode and during measurement.

For monitoring and recording data, the WQMP is equipped with the exclusive Tag Identification System: iButtonฉ s with unique ID numbers can be installed at various sampling sites and are used to record specific location information when logging.

The meter incorporates comprehensive GLP features, and download of data is done via USB connectivity.

Designed for outdoor environments, the meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1m of water). The multi sensor probe can be left underwater (IP68 standard). For field calibration, "Quick Calibration" allows the user to standardize pH, conductivity and oxygen with one solution.

Download PDF Datasheet:WQMP Multiparameter

Multiparameter Field Kits

The WQMP multiparameter water quality kit includes a pH/ORP/DO/EC/Temperature probe; quick calibration standard solution, 500 mL; probe maintenance kit; 4 rechargeable C size, Ni-MH batteries; power adapter & cable; car 12V accessory outlet adapter; (5) iButtonฉs with holder; USB interface cable; Windowsฎ compatible software and instruction manual in a rugged carrying case.

The Waterra WQMP Multiparameter calibration pack provide a selection of calibration and cleaning solutions to allow 2 or 3 point calibration of the meter. "Quick Calibration" solution can then be used between full calibration setups. The full contents of the calibration pack are listed in a separate section below.

On initial purchase, the WQMP Multipaparameter meter requires charging (14 hours) and calibration and programming. Waterra technicians offer a set-up and calibration service so that the meter is delivered to our clients "ready to go".

Code	Description
WQMP/004	Multiparameter Water Quality Field Kit - 4m Cable
WQMP/010	Multiparameter Water Quality Field Kit - 10m Cable
WQMP/020	Multiparameter Water Quality Field Kit - 20m Cable

Multiparameter Field Kits - With Longer Cable Lengths
The WQMP multiparameter water quality kit can be purchased on special order with cable lengths of up to 100 metres. The probe itself can be submerged to 40 metres - ideal for monitoring quality changes in groundwater boreholes.

Code	Description
WQMP/030	Multiparameter Water Quality Field Kit - 30m Cable
WQMP/040	Multiparameter Water Quality Field Kit - 40m Cable
WQMP/050	Multiparameter Water Quality Field Kit - 50m Cable
WQMP/060	Multiparameter Water Quality Field Kit - 60m Cable
WQMP/070	Multiparameter Water Quality Field Kit - 70m Cable
WQMP/080	Multiparameter Water Quality Field Kit - 80m Cable
WQMP/090	Multiparameter Water Quality Field Kit - 90m Cable
WQMP/100	Multiparameter Water Quality Field Kit - 100m Cable

Multiparameter Accessories: Essentials

These are the most commonly requested consumables and accessories required for day to day use of the multiparameter meter.


Download PDF Datasheet:Essential Accessories

Code	Description
WQMP/CALPACK	Multiparameter Calibration Pack
WQMP/SETUP	Multiparameter Set-Up and Calibrate.
WQMP/CAL/500	Multiparameter Probe - Quick Calibration Solution (500 ml)
WQMP/CAL/1G	Multiparameter Probe - Quick Calibration Solution (1 USGall / 3.78 litres)

Multiparameter Flow Cell Kit and Accessories

The Multiparameter Flow Through Cell Kit includes tubing and adaptors to facilitate attachment to pumps with discharge hose sizes from 9 to 16mm OD. This is sufficient to connect to most comonly used air, inertial, peristaltic or 12V submersible pumps.

Silicon tubing (1m length) is supplied to provide maximum flexibility with sufficient couplings and tubing clamps to prevent oxygen ingress via joints during pumping. A Stainless Steel one way valve is provided to avoid oxygen entrapment when using pulse pumps (e.g. bladder and other air-driven systems).

Additional tubing and 3-way valves are optionaly available for situations where longer lenghts of tube are needed (e.g. with inertial pumps) and to allow sampling or reduction of flow prior to the flow cell.

Code	Description
WQMP/FTCKit	Multiparameter Flow Through Cell Kit
SLF-3WV	3-way PE valve (for 7-9mm ID tubing)
SLF-3WV/911	3-way PE valve (for 9-11mm ID tubing)
S410/SC10F	Silicon Tubing - 3/8" x 3/16" (9.5 x 4.8mm). Peroxide cured (FG)
S410/SC16F	Silicon Tubing - 5/8" x 3/8" (15.9 x 9.5mm). Peroxide cured (FG)
WLF-03	Reducing PE Hose Connector (8-12 / 12-16mm) - Each

Multiparameter Accessories: iTags

For monitoring and recording data, the WQMP multiparameter meter is equipped with the exclusive Tag Identification System: iButtonฉ s with unique ID numbers can be installed at various sampling sites and are used to record specific location information when logging.

Code	Description
WQMP/ITAG	Multiparameter iTag Button with Holder (Pack 5)

Multiparameter Accessories: Probe Attachments

An optional flow-through cell can be separately supplied for the WQMP Multiparameter probe - essential to eliminate air contact with pumped samples from groundwater boreholes and to obtain representative DO and Redox measurements.

Spare calibration beakers are also available.

Both devices simply screw-fit in place over the end of the probe modules.

Code	Description
WQMP/FTC	Multiparameter Flow Through Cell
WQMP/BEAKER	Multiparameter Probe Calibration Beaker (Spare)

Multiparameter Accessories: Spare Probes with Cable

To allow the user greater flexibility in the field, probes with varying cable lengths can be purchased separately as accessories. Standard cable lengths of 4, 10 and 20 metres are available off the shelf. Customised lengths are also available up to a maximum of 100 metres.

The probe is pressure rated to 4 bar - equivalent to a maximum depth of submergence below water level of 40 metres.

Code	Description
WQMP/P004	Multiparameter Probe with 4m Cable
WQMP/P010	Multiparameter Probe with 10m Cable
WQMP/P020	Multiparameter Probe with 20m Cable
WQMP/P030	Multiparameter Probe with 30m Cable
WQMP/P040	Multiparameter Probe with 40m Cable
WQMP/P050	Multiparameter Probe with 50m Cable
WQMP/P060	Multiparameter Probe with 60m Cable
WQMP/P070	Multiparameter Probe with 70m Cable
WQMP/P080	Multiparameter Probe with 80m Cable
WQMP/P090	Multiparameter Probe with 90m Cable
WQMP/P100	Multiparameter Probe with 100m Cable

Multiparameter Spares : Probe Modules

The sensors on the probe are all replaceable independently and are easy to maintain and keep clean. Sensor replacement is quick and easy with screw type connectors and colour coded sensors.

The galvanic DO sensor has a built-in thermistor to provide fast temperature corrected readings. The galvanic sensor does not require polarization time so it is ready for measurement at a moment’s notice.

The 4-ring conductivity system ensures stable conductivity readings that are immune to surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and TDS determinations are possible with measurements ffrom this sensor.

The meter automatically recognises the presence of either the pH or pH/ORP sensor. Both sensors have a cloth junction which allows greater sensitivity, and are gel filled for improved resistance to contamination. The meter also displays pH mV readings ideal for trouble shooting.

Code	Description
WQMP/MPH	Multiparameter Probe - pH Module
WQMP/MPH&ORP	Multiparameter Probe - pH/ORP Module
WQMP/MDO	Multiparameter Probe - DO Module
WQMP/MEC	Multiparameter Probe - EC Module

Multiparameter Spares: Cable and Power
All cabling and power sockets are included with the field kit. Spares are readily avaialble.

Code	Description
WQMP/C04	Multiparameter - USB Cable (Spare)

Multiparameter Probe Cleaning and Maintenance
A number of additional solutions are available for cleaning the probes. The Probe maintenance Kit includes 5 spare DO membranes and DO electrolyte solution.

Code	Description
WQMP/DOKIT	Multiparameter Probe Maintenance Kit
HI-70670	Cleaning Solution for Salt Deposits (460ml bottle)
HI-70671	Cleaning / Disinfection Solution for algae, fungi & bacteria (460ml bottle)

Multiparameter Quick Calibration Solutions

The multiparameter probe features "Quick Calibration" which allows the user to calibrate pH and conductivity with one solution in a single, simple, step. The solution is supplied in botttles of 500ml or 1 gallon (3.8 lites). Dissolved Oxygen is also calibrated in a single step in saturated air.


Download PDF Datasheet:Essential Accessories

Code	Description
WQMP/CAL/500	Multiparameter Probe - Quick Calibration Solution (500 ml)
WQMP/CAL/1G	Multiparameter Probe - Quick Calibration Solution (1 USGall / 3.78 litres)

Multiparameter pH Solutions
The probe sensors are all replaceable independently and are easy to maintain and keep clean. The probe is initially supplied with 3 replaceable sensor modules: a combination pH/ORP module, EC module and DO module. The pH/ORP module can be replaced with the same or by a single parameter pH module.

Code	Description
HI-70300	pH electrode storage solution (460ml bottle)
HI-7061	pH electrode cleaning solution (460ml bottle)
HI-7004/1L	4.01 pH buffer solution (1 litre bottle)
HI-7007	7.01 pH buffer solution (460ml bottle)
HI-7007/1L	7.01 pH buffer solution (1 litre bottle)
HI-7010	10.01 pH buffer solution (460ml bottle)
HI-7010/1L	10.01 pH buffer solution (1 litre bottle)
HI-7004	4.01 pH Buffer solution (460ml bottl;e)

Multiparameter ORP Solutions

Code	Description
HI-7020	ORP 200/250mV Test Solution (460 ml bottle)
HI-7091	ORP Pre-Treatment Reducing Solution (460 ml bottle)
HI-7092	ORP Pre-Treatment Oxidising Solution (460 ml bottle)

Multiparameter DO Solutions and Membranes

Code	Description
HI-7040	Zero oxygen solution (460 ml bottle)
HI-7042S	DO probe electrolyte solution for WQMP meter (30 ml bottle)
HI-76409A/P	Replacement DO membranes for WQMP Meter - (pack of 5)

Multiparameter EC Solutions

Code	Description
HI-7033	84 us/cm EC calibration solution (460ml bottle)

Multiparameter Calibration Pack Contents

Code	Description
WQMP/BEAKER	Multiparameter Probe Calibration Beaker (Spare)
HI-70300	pH electrode storage solution (460ml bottle)
HI-7004	4.01 pH Buffer solution (460ml bottl;e)
HI-7007	7.01 pH buffer solution (460ml bottle)
HI-7010	10.01 pH buffer solution (460ml bottle)
HI-7020	ORP 200/250mV Test Solution (460 ml bottle)
HI-7040	Zero oxygen solution (460 ml bottle)
HI-Demi 02	DeIonised Water (for wash bottle) - 2 litre

Top of Page

The WQC-24 multi-parameter water quality meter uses the very latest technologies combined with more than 50 years of experience within DKK-TOA to produce a compact, high performance and robust water quality monitoring system.
The compact sensor probe can measure up to 11 parameters simultaneously out of a total of 17 available. The instrument also features an interface port for connection to a Global Positioning System (GPS), Local Area Network (LAN), printer or other communication peripherals.
A single meter can be used with three different sensor module configurations: the standard sensor module, the standard plus ion specific sensor module and the standard plus chlorophyll sensor module. See downloadable pdf sheet for more details.

Download PDF Datasheet:WQC24

DKK Standard Meter and Logging Unit

The standard WQC meter and sensor includes the ability to measure 8 individual parameters (temperature, turbidity, pH, dissolved oxygen, electrical conductivity, TDS/salinity, and seawater specific gravity). ORP can be measured in place of pH and an optional water depth sensor added.

The sensor unit has a diameter of 45mm and can be deployed at depths of up to 100 metres in boreholes (additional cable required).

See pdf for additional detail and specification.

Code	Description
DK-WQC24	WQC24 WQ Multiparameter Meter (8 parameters)

DKK Accessories
To download data from the WQC24 meter, a RS232 interface and software are required.

Code	Description
DK-RS232C	RS232 cable for use with WQC24 MP meters
DK-WQLOG	Data Control Software for DK-WQ Meters

DKK Cable
Waterra supply the standard WQC24 system complete with field suitcase and a range of accessories ready for use, including a 2m cable, For use at greater depths in boreholes or surface waters longer cable lengths up to 100 metres are available.

Code	Description
DK-C010m	10m Connection Cable for WQC-24
DK-C030m	30m Connection Cable for WQC-24
DK-C100m	100m Connection Cable for WQC-24
DK-CASE	DK Equipment Storage Case

Top of Page

A selection of high quality, waterproof (IP67), hand held meters with replaceable electrodes. Available individually or as a complete environmental monitoring field kit within a ready to go attach้ case.

Environmental Monitoring Kit (inc combined pH/ORP)

The NEW updated Waterra Environmental Monitoring Kit includes a new style pH / ORP / T meter with combined electrode. The kit can be used to measure pH, Temperature, ORP, Dissolved Oxygen and Electrical Conductivity in the field.

The Waterra Environmental Monitoring Kit is the professionals’ choice for accurate and affordable field probe measurements. By adding the unique Sheffield LFC flow-through cell you can improve the accuracy of field or laboratory measurements further by eliminating air contact with the sample AND satisfy new European and UK monitoring guidance for field measurements.

The EMK Kit is cost-effective and is priced at 7% less than if bought separately. A The Sheffield LFC flow-through cell can be purchased at massive 33% discount when ordered with an EMK.


Download PDF Datasheet:EMKSheet

Code	Description
HI-EMK	Environmental Monitoring Kit (includes waterproof pH, ORP, EC and DO meters with solutions)
HI-EMKLFC6	Environmental Monitoring Kit with Sheffield LFC 6 Cell Kit & ORP

Environmental Monitoring Kit (Solutions and Accessories)
The EMK is shipped complete with all the calibration solutions needed for immediate use. Additional mixed packs of solutions are available (HI-EMKSachets). Optional standard solutions for testing the ORP range on the combined pH / ORP meter are available separately.

Code	Description
HI-EMKSACHETS	Mixed pack of calibration sachets for EMK (pH4,7,10, EC1413)
HI-7020	ORP 200/250mV Test Solution (460 ml bottle)
HI-7091	ORP Pre-Treatment Reducing Solution (460 ml bottle)
HI-7092	ORP Pre-Treatment Oxidising Solution (460 ml bottle)
HI-EMKCASE	Field Instrumentation Case for up to 3 waterproof meters

Compact pH Meter

The HI-991001 is a tough and compact pH meter featuring a fully waterproof and dustproof case. Designed with features to make it as 'outdoor friendly' as possible, the meter floats if it is accidentally dropped into water to aid retrieval and has a rubberised keyboard and protected LCD display.

The display itself is dual level and shows the pH value measured together with the temperature of the sample. The electrode supplied with the meter incorporates the temperature sensor thus removing the need for a separate temperature probe. All readings are temperature compensated and buffer recognition and pH calibration is automatic with graphical user guides on the display.

Range -2 to 16pH & -5 to +105C with F equivalent
Resolution 0.01pH & 0.1C/0.1F
Accuracy +/-0.01pH & +/-0.5C/+/-1F

Code	Description
HI-991001	Compact and Waterproof pH Meter and electrode
HI-1296D	Replacement pH and T probe for HI-991001

Compact pH/ORP Meter (with Combined Electrode)

The HI-991003 is a waterproof pH meter which features a unique electrode status check system to ensure your meter is always performing correctly and giving truly accurate results.

The sensor check feature consists of a mV pH scale that shows the characteristics (slope & offset) of the sensor, allowing you to determine the condition of the electrode. As a pH meter is only as good as the electrode it is connected to, this is a vital check if the full accuracy of the meter is to be exploited.

The HI-991003 is housed in a fully waterproof case, with rubber keyboard and features a combined pH/ORP/temperature electrode. Temperature compensation and buffer recognition and pH calibration are automatic, whilst careful battery management provides up to 1,500 hours use from a set of standard AA batteries.

Range -2 to +16pH & -1999 to +1999mV & -5 to +105C
Resolution 0.01pH & 1mV & 0.1C
Accuracy +/-0.02pH & +/-1mV & +/-0.5C

Code	Description
HI-991003	Compact and Waterproof pH / ORP Meter with combined electrode
HI-1297D	Replacement pH, ORP (EH) and T probe for HI-991003

Portable pH/ORP Meters

Microprocessor controlled and fully waterproof (sealed to the International standard of IP67), the HI-9025 is one of our most popular, user-friendly field pH meters which are equally at home in the laboratory. The very large LCD gives simultaneous readout of both pH / mV and temperature and provides graphical symbols as a guide through the simple automatic calibration procedure - even indicating if an incorrect buffer value is used. 5 different pH buffer values are automatically recognised (4.10, 6.86, 7.01, 9.18, 10.01) and a stability indicator ensures accurate pH calibration. Temperature compensation is auto or manual from 0 to 100.0C. Meters are supplied complete with a gel filled, double junction, plastic bodied pH electrode, temperature sensor and attach้ case.

Code	Description
HI-9025C	Waterproof pH meter with 5 memorised buffers, ATC, dual display.
HI-1230B	Replacement pH electrode for HI-9025C
HI-7669/2	Replacement Temperature probe for HI-9025C
HI-3230B	Replacement ORP (EH) probe for HI-9025C

Compact 4-in-1 (pH, EC, TDS, Temp) Meters

4-in-1 waterproof multi-parameter instrument for measuring pH, conductivity, TDS and temperature in one easy to use meter, utilising a single replaceable probe.

Code	Description
HI-991300	pH/EC/TDS/Temp Multi-parameter meter. Low Range EC (0-3999 uS/cm) and TDS (0-2000 mg/l).
HI-991301	pH/EC/TDS/Temp Multi-parameter meter. High Range EC (0-19.99 mS/cm) and TDS (0-10000 mg/l).
HI-1288	Replacement pH and EC probe for HI-991300 meter

Portable Conductivity Meters

An extended range waterproof conductivity meter, which also reads TDS, NaCl, and Temperature. Portable yet suitable for use in the laboratory, all measurements are taken with just one probe with readings displayed on a large dual level LCD screen. With improved resolution and accuracy the meter can read from de-ionised water to sea water, automatically switching ranges. Main features include automatic calibration with pre-programmed buffers, automatic temperature compensation with optional manual or nil compensation for 'actual' conductivity readings, adjustable temperature coefficient and stability indicator. Supplied complete with probe on 1m of cable, batteries and attach้ case.

Code	Description
HI-9835	Waterproof EC/Temp/TDS/NaCL meter, ATC, dual display, Autoranging EC scales (0 to 500 mS/cm)
HI-76302	Replacement EC probe for HI-9033 and HI-933100
HI-76309	Replacement EC probe for HI-9835

Portable Dissolved Oxygen Meters

High specification fully waterproof (to IP67) portable dissolved oxygen meters. Each gives microprocessor controlled results on a large easy to read LCD display which shows dissolved oxygen and temperature simultaneously. Dissolved oxygen readout can be selected in ppm or % saturation. Calibration is automatic in 100% saturated air by simply pressing the CAL button. In a few minutes the meters are calibrated and ready to use.

Code	Description
HI-9142	Waterproof DO meter, 1pt calibration, ATC (0 to 19.9 mg/l)
HI-9146	NEW Water Resistant DO meter, 1pt calibration, ATC, dual display (0 to 19.9 mg/l; 0 to 100%)
HI-76407A/P	Replacement DO membranes for HI-9142/5/6. New Style - (pack of 5)
HI-76407V/P	Replacement DO membranes for HI-9142/5 - Old Style (pack of 5)
HI-76407/4	Replacement DO probe for HI-9142/5

Top of Page

NEW Advanced pocket testers provide affordable and high quality measurement of pH, EC, Temperature and TDS. All Advanced testers feature waterproof cases which float in water, a battery life indicator AND replaceable electrodes. Ideal for simple field measurements. ORP and Temperature Testers.

Download PDF Datasheet:Pocket Testers

pH Meters

This unique pH tester represents a significant advance in affordable pH measurement. The multi-level display shows the pH value as well as the temperature value, and incorporates a stability indicator to let you know when your pH value is stable. Calibration is fully automatic with automatic buffer recognition and automatic temperature compensation. The operator can select whether to have temperature displayed in degrees C or F. In addition the meter is fitted with a battery monitoring device which tells the operator of battery life left in terms of percentage every time the meter is swtiched on. To conserve battery life the meter switches off automatically after approximately 8 minutes. A further major benefit is the ability to change the electrode when it becomes exhausted, thus prolonging the operational life of the meter. Spare electrodes are available and simply click into place whilst retaining the waterproof characteristics of the case.

Code	Description
HI-98127	Waterproof pH and temperature tester, 0.1pH accuracy, auto calibration.
HI-98128	Waterproof pH and temperature tester, 0.01pH accuracy, auto calibration.
HI-73127	Replacement pH electrode for HI-98127, HI-98128, HI-98129, HI-98130

Conductivity Meters

A unique conductivity meter that offers features in a pocket sized meter that you would normally find on a high specification bench meter. The HI-98311 features an easy to read dual level LCD display to clearly show the conductivity value being measured alongside the temperature of the sample being measured. The LCD also incorporates a battery level indicator, stability indicator, and temperature readout in either C and F. The EC meter itself is fully waterproof and even floats to aid retrieval, it also features a replaceable electrode which is simplicity itself to change. The sophisticated electronics monitor and display battery life every time the meter is switched on and conserve battery life by automatically switching the meter off after use. The meter is easy to calibrate offering automatic single point calibration recognition and automatic calibration.

Code	Description
HI-98311	Waterproof EC tester, auto calibration (0 to 3999 uS/cm)
HI-98312	Waterproof EC tester, auto calibration (0 to 20 mS/cm)
HI-73311	Replacement EC electrode for HI-98311, HI-98312, HI-98129, HI-98130

Combined pH and Conductivity Testers

A unique meter that offers features in a pocket sized meter that you would normally find on a high specification bench meter. The HI-98129 features an easy to read dual level LCD display to clearly show the conductivity value being measured alongside the temperature of the sample being measured. The LCD also incorporates a battery level indicator, stability indicator, and temperature readout in either C and F. The meter itself is fully waterproof and even floats to aid retrieval, it also features a replaceable electrode which is simplicity itself to change. The sophisticated electronics monitor and display battery life every time the meter is switched on and conserve battery life by automatically switching the meter off after use. The meter is easy to calibrate offering automatic single point calibration recognition for conductivity and 5 pH buffer values. In both cases calibration is fully automatic and both quick and easy.

Code	Description
HI-98129	Combined pH / EC tester (0.05 pH & 0 to 3,999 uS/cm)
HI-98130	Combined pH / EC tester (0.5 pH & 0 to 20 mS/cm)
HI-73127	Replacement pH electrode for HI-98127, HI-98128, HI-98129, HI-98130
HI-73311	Replacement EC electrode for HI-98311, HI-98312, HI-98129, HI-98130

ORP (EH) Meters

This new microprocessor-based tester provides the most advanced solution in ORP measurement and includes: Replenishable junction; Dual Level LCD; Battery Life Percentage Indication; Stability Indicator; Floating and Waterproof Body.

This tester is factory calibrated and measurements are highly accurate.

The HI-73120 ORP electrode is provided with a pull-out cloth junction and can be easily replaced by the user. The encapsulated stainless steel temperature sensor provides a fast response thanks to its external location.

The HI-98120 is supplied complete with protective cap, electrode removal tool, batteries and instructions

Code	Description
HI-98120	ORP - Waterproof ORP / T tester, manual calibration, (-999 to + 999mV)

Thermometers

Checktemp is a pocket thermometer offering a very high degree of accuracy and the unique ability for the user to check the calibration on site without the need to return it to us! With a fixed, pointed tip, stainless steel sensor Checktemp displays temperature in C from -20.0 to +120.0C with an accuracy of +/-0.3C (-20 to 90C).

Code	Description
HI-98501	CHECKTEMP - Stick type thermistor thermometer

Top of Page

Specific-ion colorimeters provide a simple, inexpensive and rapid means of field surveillance. The colour of every object we see is determined by a process of absorption and emission of light by the molecules of which it is made. Colorimetric analysis is based on the principle that many substances react with each other and form a product whose colour is determined by the concentration of the substance to be measured.

Hanna colorimeters use single colour LED's (light emitting diodes) that emit a single wavelength specific to the substance being measured. The optical distance is measured by the dimension of the cuvette containing the sample. The instruments photoelectric cell collects the radiated light emitted buy the sample and converts it into an electrical current producing a potential in mV. This is then converted into a direct reading in mg/l of concentration of the sample within the cuvette being measured and displayed on the LCD of the instrument.

Ammonia Meter (Mid range) and Reagents

Code	Description
HI-95715	NEW Ammonia Monitoring Kit, mid range (0 to 9.99 mg/l) including 2 cuvets and caps
HI-95715-11	Set of Ammonia Calibration Standards (1x 0 ppm; 1 x 15 ppm)
HI-93715-01	Ammonia reagent kit, mid range (100 tests)
HI-93715-03	Ammonia reagent kit, mid range (300 tests)

Ammonia Meter (High range) and Reagents

Code	Description
HI-93733	Ammonia specific ion meter, high range (0 to 50 mg/l)
HI-93733-01	Ammonia reagent kit, high range (100 tests)
HI-93733-03	Ammonia reagent kit, high range (300 tests)

Other Colorimeter Accessories

Code	Description
HI-93703-50	Cleaning Solution for Glass Cuvets - 230ml
HI-731321	Cuvet Glass - 10ml (small)
HI-731325	Plastic cuvet caps for HI731321

Top of Page

Alkalinity Test Kit and Accessories

A chemical test kit which determines phenolphthalein and total alkalinity in two ranges with ease and accuracy. The kit is accurate using a dropper bottle designed to count drops precisely and a ported cap to prevent spillage. Reagents are prepared to recognised lab standards using Analytical Grade chemicals. Reliable: ASTM, BP/USP and Standard Methods are used, reagents are traceable to NIST standards. Convenient: tests are quick to perform using liquid reagents (pre-mixed), supplied in kit format ready to use. Reagents are safe. Solutions are dropped directly into the sample preventing possible skin contact, containers are made of durable plastic to prevent damage in transport. This easy to use kit includes 30ml and 100ml calibrated vessels with ported caps, reagent 1 and 2 (30ml each), reagent 3 (120ml) and calibrated syringe for titrations.

Code	Description
HI-3811	Alkalinity test kit

Turbidity Meters and Accessories

The HI-93703 microprocessor based turbidity meter provides lab-grade accuracy even in the field. HI-93703 measures from 0 to 50 FTU in steps of 1/1000th of FTU (NTU). This is ten times better than comparable models on the market that measure in only single decimal points. The meter is equipped with an infrared LED as a light source which has a long life - it maintains constant emissions that will last as long as the instrument. The wavelength peaks at 890 nm, which provides the required intensity of diffused light even in samples with low turbidity values, and also reduces the interference from colors. The meter is very easy to use - all operations can be carried out with a few keys and troubleshooting functions can be performed with error codes on the LCD. Moreover, the meters versatility and durability ensure low maintenance. Sensitive to the users need to work with properly calibrated meters, Hanna has equipped HI-93703 with a unique GLP (good laboratory practice) feature. The GLP circuit automatically stores and retrieves the last calibration data. At the touch of a button these data, together with the time and date, are displayed allowing the user to maintain an accurate calibration schedule.

Code	Description
HI-93703C	Turbidity meter, 0/10FTU standards, 4 cuvets, attache case.
HI-93703-0	Turbidity solution (Zero FTU/NTU)
HI-93703-10	Turbidity solution (10 FTU/NTU)

Top of Page

Our sachets include 20ml of solution certified against a NIST standard ensuring accuracy for precise calibration every time. Sachets are ideal if you need to calibrate for pH or conductivity away from the laboratory - perhaps during environmental studies or in field applications. Pre-mixed and sealed against air contamination and daylight, the solutions are fresh and ready to use at any time and are very convenient - no need to carry large bottles of solutions around or to mix buffers on site with distilled water if using capsules. Shelf life is very long - a minimum of 2 years with the expiry date foil stamped onto each and every sachet. To use simply tear open the sachet and insert the electrode or probe into the calibration fluid - then calibrate your meter. Compatible for calibration with meters from all manufacturers, these sachets can be used with any meter. Each sachet includes a useful temperature v pH / conductivity or TDS value chart for quick reference.

General Use Sachets for Probes

Code	Description
HI-70000P	Electrode Rinse Solution - sachets (20ml - pack of 25)
HI-700661P	Cleaning Solution - sachets (20ml - pack of 25)

pH Sachets

Code	Description
HI-70004P	4.01 pH buffer sachets (20ml - pack of 25)
HI-70007P	7.01 pH buffer sachets (20ml - pack of 25)
HI-70010P	10.01 pH buffer sachets (20ml - pack of 25)

EC and TDS Sachets

Code	Description
HI-70033P	84 us/cm EC calibration sachets (20ml - pack of 25)
HI-70031P	1413 us/cm EC calibration sachets (20ml - pack of 25)
HI-70039P	5000 us/cm EC calibration sachets (20ml - pack of 25)
HI-70030P	12,880 us/cm EC calibration sachets (20ml - pack of 25)
HI-70038P	6.44ppt TDS solution calibration sachets (20ml - pack of 25)

Top of Page

In many labs, buffer solutions are often prepared from capsules, tablets and chemical powders, presuming that they are more accurate and less expensive when 'freshly' made. This, however, is subject to the quality and weight of the chemicals and distilled water as well as many other factors such as temperature control and the instrumentation used for their preparation. Our buffers are prepared with analytical grade chemicals in a clean laboratory environment and using high-tech reference material. pH buffers are certified to +/- 0.01 accuracy at 25 C and carry individual expiration dates. Some solutions are also supplied in FDA approved amber bottles which are impervious to direct light. All solutions are produced against instruments calibrated by high purity NIST standard reference material. Only analytical grade chemicals are used in such quantities as to guarantee accuracy. All calibration solutions are also supplied with a colour-coded label containing a pH versus temperature chart. This time-saving reference table prevents errors during calibration, especially in outdoor applications.

pH Solutions

Code	Description
HI-70300	pH electrode storage solution (460ml bottle)
HI-7061	pH electrode cleaning solution (460ml bottle)
HI-7004/1L	4.01 pH buffer solution (1 litre bottle)
HI-7007	7.01 pH buffer solution (460ml bottle)
HI-7007/1L	7.01 pH buffer solution (1 litre bottle)
HI-7010	10.01 pH buffer solution (460ml bottle)
HI-7010/1L	10.01 pH buffer solution (1 litre bottle)
HI-7004	4.01 pH Buffer solution (460ml bottl;e)

EC and TDS Solutions

Code	Description
HI-7037	100% NaCl standard solution (460ml bottle)
HI-7033	84 us/cm EC calibration solution (460ml bottle)

DO Solutions

Code	Description
HI-7041S	DO probe electrolyte solution (30ml bottle)
HI-7042S	DO probe electrolyte solution for WQMP meter (30 ml bottle)
HI-7040	Zero oxygen solution (460 ml bottle)

ORP Solutions

Code	Description
HI-7020	ORP 200/250mV Test Solution (460 ml bottle)
HI-7091	ORP Pre-Treatment Reducing Solution (460 ml bottle)
HI-7092	ORP Pre-Treatment Oxidising Solution (460 ml bottle)

Top of Page