
Torquer Well Plugs
|
Torquer well plugs incorporate a simple but reliable locking mechanism with no moving parts. They are brightly coloured with a comfort grip using an "easy on", "easy off" wing nut design. The seals are formed from a dual rubber gasket which is liquid tight and super-strong.
Two instrument tethering eyes are included at the base of the plugs for suspending equipment. Plugs are lockable using a Master Lock #1 or #3 or equivalent.
Well plugs are constructed from a partially recycled plastic incorporated into a 33% glass filled Nylon body. The gasket is composed of neoprene. These plugs will completely seal the borehole and are unvented.
For use with loggers, most plugs can be supplied with a small diameter vent hole to prevent pressurisation of the borehole during logging. Please be aware this does introduce a small opening in the plugs and consequently vented plugs should not be used for permanent sealing of boreholes, particularly where flooding can occur.
For more details:
or
Torquer Well Plugs (Stock Sizes)
|
The most commonly used well plugs for 2 inch (50mm) and 4 inch (100mm) borehole linings. Choose a Torquer well plug to match your borehole ID (minimum borehole lining ID in mm is indicated in description). Torquer well plugs are capable of expanding in excess of 10 mm above their minimum diameter. Padlocks are not supplied. Vented plugs are available on request. |
|
|
|
|
||||||||||||
|
||||||||||||||
Keyed Alike Padlocks
|
Galvanised steel "Old English" tamper proof 4 lever all weather padlock. Sized to match Torquer Plugs. "Keyed alike" (in packs of 6. |
|
|
|
|
|||
|
|||||
Torquer Well Plugs (Supplied to Order)
|
A greater range of well plug sizes are available on special order. Minimum borehole lining ID in mm is indicated in description. Padlocks are not supplied. Ventd plugs are available on request. |
|
|
|
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||