
SP1 Suction Pump and Accessories
|
Used in conjunction with inertial pumps, the SP1 pump can also be used for purging and sampling boreholes at suction depths, typically where water levels are within 7 to 9m of ground level. It has a total head of 36m.
The inertial pump is used to manually prime the suction pump, which can then be used to discharge purge water lifted by suction through the inertial pump tubing. Once purging is completed and to avoid cross-contamination, the suction pump is disconnected and samples taken by manual operation of the inertial pump.
Check out the range of tubing connections and adaptor spares listed below or call +44 (0)121 733 7743 today to speak to our technical sales team.
For more details:
or
SP1 Pump
|
|
|
|
|
|||
|
|||||
Standard Inertial Pump Tubing Connections
|
For connecting to Standard Inertial Pump tubing, use a STD tubing adaptor kit consisting of: - STX-1 PVC tubing - 2metre (connects the STD inertial tube to the SP1 pump) - SP/01 Nylon hose adaptor (to connect the STX tubing to the SP1 pump) - SP/06 Jubilee clips, 22 to 25mm (x2) - Instruction sheet Component parts are listed below as spares. A length of 25mm discharge hose is also required which is attached to the SP1 pump using metal 25mm discharge hose clips (SP/03). Hose clips are available as spares, though several are supplied with the SP1 pump. |
|
|
|
|
||||||
|
||||||||
High Flow Inertial Pump Tubing Connections
|
For connecting to High Flow Inertial Pump tubing, use either a black reinforced suction hose (SP1/HF-1) or High Flow suction / extension tubing (HFX-1). A length of 25mm discharge hose is also required which is attached to the SP1 pump using metal 25mm discharge hose clips (SP/03). Hose clips are available as spares, though several are supplied with the SP1 pump. |
|
|
|
|
|||||||||
|
|||||||||||
SP1 Adaptor Spares
|
Component parts and spares for making tubing connections can be purchased separately using the following codes. |
|
|
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||