In-Situ RDO SensorsIn-Situ Aqua TROLLIn-Situ TROLL 9500In-Situ Logger CableIn-Situ Coms Systems
WQMP Multiparameter MeterWaterproof Field MetersPocket TestersColorimeters & Test KitsFilters & Flow CellsSolutions (Sachets & Bottles)
WQMP Multiparameter Water Quality Meter
|
GPS enabled units use conventional GPS functionality to record spatial co-ordinates which can be uploaded and viewed using standard Google maps on your PC.
The WQMP multiparameter water quality kits includes:
- a pH/ORP/DO/EC/Temperature probe;
- quick calibration standard solution (500 mL);
- probe maintenance kit;
- 4 rechargeable C size, Ni-MH batteries;
- power adapter & cable; car 12V accessory outlet adapter;
- iButton©s with holder (x5);
- USB interface cable;
- Windows® compatible software and instruction manual;
- rugged field instrument case.
For monitoring and recording data, the WQMP is equipped with the exclusive Tag Identification System: iButton©s with unique ID numbers can be installed at various sampling sites and are used to record specific location information when logging.
The meter incorporates comprehensive GLP features, and download of data is done via USB connectivity.
Designed for outdoor environments, the meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1m of water). The multi sensor probe can be left underwater (IP68 standard). For field calibration, "Quick Calibration" allows the user to standardize pH, conductivity and oxygen with one solution.
The Waterra WQMP Multiparameter calibration pack provide a selection of calibration and cleaning solutions to allow 2 or 3 point calibration of the meter. "Quick Calibration" solution can then be used between full calibration setups.
For more details:
WQMP Multiparameter
or
Download as PDF
Standard Multiparameter Water Quality Field Kits
|
Apart from GPS, the standard field units include all the features of the GPS enabled field kits. Stock cable lengths of 4, 10 and 20 metres are avaialable and longer lengths can be supplied in 10m increments up to 100 metres. The probe itself is pressure rated to 40 metres depth of submergence. On initial purchase, the WQMP Multipaparameter meter requires charging (14 hours) and calibration and programming. Waterra technical staff can offer a set-up and calibration service so that the meter is delivered to our clients "ready to go". |
|
|
|
|
|||||||||
|
|||||||||||
GPS Enabled Multiparameter Water Quality Field Kits
|
GPS enabled field kits are available from stock with cable lengths of 4, 10 and 20 metres. Longer cable lengths can be supplied in 10m increments up to 100 metres. The probe itself is pressure rated to 40 metres depth of submergence. On initial purchase, the WQMP Multipaparameter meter requires charging (14 hours) and calibration and programming. Waterra technical staff can offer a set-up and calibration service so that the meter is delivered to our clients "ready to go". |
|
|
|
|
|
|||||||||
|
|||||||||||
Peli Case - Weatherproofed Customised Field Case
|
Upgrade your purchase with this customised Peli weatherproof field case. Organises and protects your equipment. Customised insert includes space for all items of equipment including quick cal solution and accessories. |
|
|
|
|
|
|||
|
|||||
Multiparameter Field Kit Accessories
|
These are the most commonly requested consumables and accessories required for day to day use of the multiparameter meter. The WQMP/CalPack includes10 separate solutions and a spare probe beaker for a price 40% less than purchasing these individually! |
|
|
|
|
|
|
|
||||||||||||
|
||||||||||||||
Flow Cell Kit and Accessories
|
The Multiparameter Flow Through Cell Kit includes tubing and adaptors to facilitate attachment to pumps with discharge hose sizes from 9 to 16mm OD. This is sufficient to connect to most comonly used air, inertial, peristaltic or 12V submersible pumps. Silicon tubing (20 cm lengths) is supplied to provide maximum flexibility with sufficient couplings and tubing clamps to prevent oxygen ingress via joints during pumping. A Stainless Steel one way valve is provided to avoid oxygen entrapment when using pulse pumps (e.g. bladder and other air-driven systems). Additional tubing and 3-way valves are optionaly available for situations where longer lengths of tube are needed (e.g. with inertial pumps) and to allow sampling or reduction of flow prior to the flow cell. |
|
|
|
|
|
|
|
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||||