
Wellhead Suspension Caps and Plugs
|
These accessories are suitable for use with a wide range of datalogging equipment. Our well caps and plugs are available in vented and unvented versions.
Check out the product list below for more information or call +44 121 733 7743 to speak to our technical sales team.
Torquer Well Plugs
|
Torquer well caps are a simple well plug incorporating two eyelets for securing loggers suspended on stainless steel cable. Choose a Torquer well plug to match your borehole ID (minimum borehole lining ID in mm is indicated in description). Torquer well plugs are capable of expanding in excess of 10 mm above their minimum diameter to provide a water tight seal. Padlocks are not supplied. For use with loggers, plugs can be supplied with a 2mm diameter vent hole to prevent pressurisation of the borehole during logging. Please be aware this does introduce a small opening in the plugs and consequently vented plugs should not be used for permanent sealing of boreholes, particularly where flooding can occur. For more information on the full range see Torquer Well Plug Page. |
|
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||||
EnviroCap Well Caps
|
|
|
|||||||||
|
|||||||||||