| Groundwater equipment for professionals |
 |
|
Groundwater monitoring pumps |
|
Waterra Inertial Pumps SP1 suction pump Portable light weight pump for use where water level is within suction depth |
PR09 |
|
 |
  |
    Above: SP1 suction pump in use with HF inertial pump Left: SP1 suction pump in use with STD inertial pump 
|
|
The Waterra SP1 suction pump is powered by a 25cc Honda 4-stroke petrol engine and weighs a mere 6.1 kg. It is ideal for purging and sampling from boreholes, where water level is within suction depth. Connecting to Standard Inertial Pump use a STD tubing adaptor kit conisting of: - STX-1 PVC tubing - 2 meter (connects to the STD inertial tube to the SP1 pump) - SP/01 Nylon hose adaptor (to connect the STX tubing to the SP1 pump) - SP/06 Jubilee clips, 22 to 25mm (x2) -Instruction sheet Connecting to High-Flow Inertial Pump For connecting to High Flow Inertial Pump tubing, use either a black reinforced suction hose (SP1/HF-1) or High Flow suction / extension tubing (HFX-1). A length of 25mm discharge hose is also required which is attached to the SP1 pump using metal 25mm discharge hose clips (SP/03). Hose clips are available as spares, though several are supplied with the SP1 pump. 
|
   |
|
Further information For further information regarding the use of Inertial Pumps, please refer to the following data sheets which can be downloaded from our website: |
PR07 Inertial pump tubing and valves PR08 Powered inertial pumping - PowerPack PP1 PR10 Inertial pumping applications |
|
|
|
Waterra (UK) Ltd, Unit 4, 179-189 Stratford Road, Shirley, Solihull B90 3AU, UK Tel: +44 (0)121 733 7743 Fax: +44 (0)121 733 7746 email: sales@WaterraUK.com |
www.WaterraUK.com |